Dell Storage Center SCv2020 시작하기 매뉴얼 - 페이지 7

{카테고리_이름} Dell Storage Center SCv2020에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Storage Center SCv2020 19 페이지. Storage center
Dell Storage Center SCv2020에 대해서도 마찬가지입니다: 소유자 매뉴얼 (42 페이지), 시작하기 매뉴얼 (20 페이지)

페이지 인쇄

1. Installation and Configuration

(4-port I/O card only) IPv4 address for storage controller

module 2: port 4

Additional Storage Center Information

The Network Time Protocol (NTP) and Simple Mail Transfer Protocol (SMTP) server

information is optional. The proxy server information is also optional, but it may be

required to complete the Discover and Configure Uninitialized SCv2000 Series

Storage Centers wizard.

Table 5. NTP, SMTP, and Proxy Servers

NTP server IPv4 address

SMTP server IPv4 address

Backup SMTP server IPv4

address

SMTP server login ID

SMTP server password

Proxy server IPv4 address

Fibre Channel Zoning Information

For a storage system with Fibre Channel front-end ports, record the physical and

virtual WWNs of the Fibre Channel ports in Fault Domain 1 and Fault Domain 2. This

information is displayed on the Review Front-End page of the Discover and

Configure Uninitialized SCv2000 Series Storage Centers wizard. Use this

information to configure zoning on each Fibre Channel switch.

See the Dell Storage Center SCv2000/SCv2020 Storage System Deployment Guide

for information about setting up Fibre Channel zoning.

Table 6. Physical WWNs in Fault Domain 1

Physical WWN of storage controller 1: port 1

Physical WWN of storage controller 2: port 1

___ . ___ . ___ . ___

________________

___ . ___ . ___ . ___

________________