Dell Storage MD1400 series 소유자 매뉴얼 - 페이지 20

{카테고리_이름} Dell Storage MD1400 series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Storage MD1400 series 37 페이지. Storage enclosure
Dell Storage MD1400 series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (7 페이지), 관리자 매뉴얼 (48 페이지)

페이지 인쇄

Installing an AC power supply unit or cooling fan module

Slide the power supply unit or cooling fan module into the chassis until the release tab clicks into

place.

Connect the power cable to the power supply unit or cooling fan module and plug the cable into a

power outlet.

Secure the power cable using the Velcro strap.

Figure 14. Securing the power cable

Velcro strap

CAUTION: When connecting the power cable, secure the cable with the Velcro strap.

NOTE: If the enclosure is powered on, all the power supply LEDs remain off until the AC power

cable is connected to the power supply unit or cooling fan module and the power switch is

turned on.

Turn on the power supply unit or cooling fan module.

About DC power supply units

An MD Series storage array receives its power from two power supply modules. In a DC-powered MD

Series storage array, the power supply module receives power from two 48 V DC PSUs. Each power

supply module has two cooling fans.

NOTE: The fans that keep the array cool are integrated into the power supply modules and cannot

be replaced separately. If a fan stops functioning, you must replace the entire power supply module.

Power indicator codes

The DC power supply module has LEDs that indicate power supply status. Under normal conditions, the

power output and line input LEDs are lit at the same time.