Dell TUMAE 소유자 매뉴얼 - 페이지 39

{카테고리_이름} Dell TUMAE에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell TUMAE 47 페이지. Direct-attach storage for poweredge servers

Figure 36. Disconnect the power cable

3. Loosen the thumbscrew that attaches the PSU to the chassis.

4. Pull down on the orange tab to rotate the handle downward and release the PSU from its seated position.

5. Gently pull the PSU out of the enclosure with one hand and the other hand supporting its weight.

Ensure that the PSU remains level while removing it from the enclosure.

Figure 37. Remove the PSU

Install the PSU

Perform the following steps to install the PSU in an enclosure:

Steps

1. Hold the PSU handle in the open position and use one hand to support the weight of the PSU and the other hand to guide it

into the empty slot.

2. Push the PSU into the chassis until it stops. Ensure that the PSU remains level.

3. Push the orange tab to rotate the PSU handle upwards to the closed position.

Replacing components