Dell 5324 - PowerConnect Switch 릴리스 노트 - 페이지 16
{카테고리_이름} Dell 5324 - PowerConnect Switch에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5324 - PowerConnect Switch 23 페이지. Release notes
페이지 인쇄unlearned source. This is the default
value.
♦
Shutdown — Discards the packet from
any unlearned source and locks the
port. Ports remain locked until they are
activated, or the device is reset.
Port Security
In the introduction, under the
•
Forwarded
•
Discarded with no trap
•
Discarded with a trap
•
The ingress port is disabled"
Note: In order to enable port security, the Multiple Hosts feature must first be enabled on the required port(s).
Port Configuration
Before the CLI example, enter the following Note:
Note: When device wakes up with autobaud enabled, press "Enter" twice to activate the autobaud.
Radius Settings
Modify
Field
Current
Syntax
Usage Type — Specifies the server usage
Parameters
type. Can be one of the following values:
login, 802.1x or all. If unspecified, defaults
to all
Description
Remote Authorization Dial-In User Service
(RADIUS) servers provide additional
security for networks.
802.1x
Title
Radius attributes relevant to 802.1x
System Firmware Version 2.0.0.39
PowerConnect 5324 Release Notes
"Unauthorized packets arriving to a locked port are either:
Description
The Radius attributes that are relevant to 802.1x functionality are:
EAPMessage = 79, MessageAuthenticator = 80, State = 24, Class = 25.
Subject to Change Without Notice
♦
Discard Shutdown — Discards the
packet from any unlearned source and
locks the port. Ports remain locked until
they are activated, or the device is
reset.
New
Usage Type — Specifies the server usage
type. Can be one of the following values:
login, dot.1x or all. If unspecified, defaults
to all
Remote Authorization Dial-In User Service
(RADIUS) servers provide additional
security for networks. Up to 4 RADIUS
servers can be defined.
Page 12