Dell 5324 - PowerConnect Switch 릴리스 노트 - 페이지 21
{카테고리_이름} Dell 5324 - PowerConnect Switch에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5324 - PowerConnect Switch 23 페이지. Release notes
페이지 인쇄channel-group
Update the command as follows:
Field
Current Guide
User
There are no user guidelines for this
Guidelines
command.
wrr-queue bandwidth
Update the command as follows:
Field
Current Guide
♦
User
All 4 queues are participating
Guidelines
excluding the queues that are
assigned as expedite queues. The
weights of these queues are ignored
in the ratio calculation.
♦
All 4 queues participate in the WRR
exclude the expedite queues, in
which case the corresponded weight
is ignored (not used in the ratio
calculation). The expedite queue is a
priority queue, and it is serviced until
empty before the other queues are
serviced.
rmon collection history
Update the command as follows:
Field
Current Guide
Syntax
owner ownername—Records the RMON
Parameter
statistics group owner name. If
unspecified, the name is an empty string.
switchport trunk allowed vlan
Update the command as follows:
Field
Current Guide
Syntax
switchport trunk allowed vlan {add
Parameter
vlan-list | remove vlan-list }
•
add vlan-list—List of VLAN IDs to
add. Separate non consecutive VLAN
IDs with a comma and no spaces. A
hyphen designates a range of IDs.
System Firmware Version 2.0.0.39
PowerConnect 5324 Release Notes
Change to:
For redundancy reasons, the LACP port channel
can accept up to 16 ports but only 8 will be active
at the same time.
Change to:
♦
All 4 queues are participating excluding the
queues that are assigned as Strict Priority
(SP) queues. The weights of these queues
are ignored in the ratio calculation.
♦
All 4 queues participate in the WRR exclude
the Strict Priority (SP) queues, in which case
the corresponded weight is ignored (not
used in the ratio calculation). The expedite
queue is a priority queue, and it is serviced
until empty before the other queues are
serviced.
Change to:
owner ownername—Records the RMON
statistics group owner name. If unspecified, the
name is an empty string (Range: 0-20
characters).
Change to:
switchport trunk allowed vlan {add vlan-list/all
| remove vlan-list/all }
♦
add vlan-list—List of VLAN IDs to add.
Separate non consecutive VLAN IDs with a
comma and no spaces. A hyphen
designates a range of IDs. The option all
Subject to Change Without Notice
Page 17