Dell 5500 Series 설정 및 사양 매뉴얼 - 페이지 36
{카테고리_이름} Dell 5500 Series에 대한 설정 및 사양 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 5500 Series 40 페이지. Dell networking 5500 gigabit ethernet switches
Dell 5500 Series에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 시작 매뉴얼 (18 페이지)
페이지 인쇄
Option
Description
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided
by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware
capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization Technology, and the
Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution - disabled by default.
Wireless
Option
Description
Wireless Device
Allows you to enable or disable the internal wireless devices.
Enable
•
•
All the options are enabled by default.
Maintenance screen
Option
Description
Service Tag
Displays the Service Tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
BIOS Downgrade
This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is enabled by
default.
Data Wipe
This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next boot' is
not enabled by default. The following is list of devices affected:
•
•
•
•
BIOS Recovery
This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary
hard drive or an external USB key.
•
•
First Power On
This option lets you set Ownership date.
Date
•
System logs
Option
Description
BIOS Events
Allows you to view and clear the System Setup (BIOS) POST events.
Thermal Events
Allows you to view and clear the System Setup (Thermal) events.
Power Events
Allows you to view and clear the System Setup (Power) events.
36
System setup
WLAN
Bluetooth
Internal SATA HDD/SSD
Internal M.2 SATA SDD
Internal M.2 PCIe SSD
Internal eMMC
BIOS Recovery from Hard Drive—enabled by default
Always perform integrity check—disabled by default
Set Ownership Date—disabled by default