Dell DF10MXL 시작하기 매뉴얼 - 페이지 12

{카테고리_이름} Dell DF10MXL에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell DF10MXL 36 페이지. Networking mxl 10/ 40gbe switch io module

Port Numbering

When installed in a PowerEdge M1000e Enclosure, the MXL 10/40GbE

Switch ports are numbered 33 to 56 from the bottom to the top of the switch:

•

40GbE base-module ports:

•

In 40GbE mode of operation, the ports are numbered 33 and 37.

•

In 4x10GbE mode of operation, the ports are numbered 33 to 36

and 37 to 40.

For information about how to change a 40GbE port to 4x10GbE mode,

refer to Splitting 40GbE QSFP+ Ports into 10GbE SFP+ Ports.

•

2-Port 40-GbE QSFP+ module operating in the default 4x10GbE mode:

•

In expansion slot 0, the ports are numbered 41 to 44 and 45 to 48.

•

In expansion slot 1, the ports are numbered 49 to 52 and 53 to 56.

For information about how to change a port from 4x10GbE to 40GbE

mode of operation, refer to FlexIOTM Plug-in Modules.

•

2-Port 40-GbE QSFP+ module operating in 40GbE mode:

•

In expansion slot 0, the ports are numbered 41 and 45.

•

In expansion slot 1, the ports are numbered 49 and 53.

•

4-Port 10-GbE SFP+ or 10GBASE-T module:

•

In expansion slot 0, the ports are numbered 41 to 44.

•

In expansion slot 1, the ports are numbered 49 to 52.

•

The FC Flex IO modules ports operate:

•

In expansion slot 0, the ports are numbered 41 to 44.•

•

In expansion slot 1, the ports are numbered 49 to 52.

Hardware Overview