Dell EMC N2200-ON Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} Dell EMC N2200-ON Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC N2200-ON Series 10 페이지. Powerswitch; external power supply installation
Dell EMC N2200-ON Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지)

페이지 인쇄
Dell EMC N2200-ON Series 설치 매뉴얼
2. Screw one L-bracket to the switch using the four M4 screws (length 6.8 mm).
Install the brackets to the switch in front, five-inch-offset, or rear mounting positions, as shown.
● For front-mount: The mounting bracket and bracket ears face the front of the EPS.
● For five-inch-offset mount: The mounting bracket is at the front of the EPS with the bracket ears facing the back of the
EPS.
● For rear-mount: The mounting bracket and bracket ears face the back of the EPS.
Torque the screws to 10 inch-lbs.
Front mount
5-inch offset mount
Rear mount
3. Repeat with the second single-switch L-bracket.
N-Series EPS installation
5