Dell EMC PowerSwitch S4200-ON Series 설정 매뉴얼 - 페이지 11

{카테고리_이름} Dell EMC PowerSwitch S4200-ON Series에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC PowerSwitch S4200-ON Series 19 페이지.

Figure 3. 1U tool-less installation

2. Align and seat the front flange pegs in the holes on the front side of the vertical post.

NOTE:

Be sure that the rails click into place and are secure.

3. Repeat this procedure for the second rail.

4. To remove each rail, pull on the latch release button on each flange ear and unseat each rail.

Two-post flush-mount installation

NOTE:

For more installation instructions, see the installation labels attached to the rail assembly.

1. For this configuration, remove the latch castings from the front side of each ReadyRails assembly, item 1.

To remove the two screws from each front flange ear on the switch side of the rail and remove each latch casting, use

a Torx screwdriver. Retain the latch castings for future rack requirements. It is not necessary to remove the back flange

castings.

S4200-ON Series Installation