Dell EMC PowerSwitch S5148F-ON 설치 매뉴얼 - 페이지 37

{카테고리_이름} Dell EMC PowerSwitch S5148F-ON에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC PowerSwitch S5148F-ON 45 페이지.
Dell EMC PowerSwitch S5148F-ON에 대해서도 마찬가지입니다: 설정 매뉴얼 (20 페이지)

페이지 인쇄

4. Optional: Add a device to the file systems table using the fstab command. Mount the file systems.

ONIE:/ # vi /etc/fstab

# FSTAB entry for the ONIE-BOOT partition mounted on /boot

LABEL=ONIE-BOOT /mnt/onie-boot ext4

/dev/sdb

ONIE:/ # mount -a

The mount -a command mounts all the file systems as indicated in the /etc/fstab file.

Before you install an OS

After powering on the S5148F-ON switch, it goes through a power-on self-test (POST).

POST runs every time the switch is initialized and checks the hardware components to determine if the switch is fully

operational before booting. After POST, the switch uses the Grub bootloader.

To select an entry, use the up and down arrow keys. Press Enter to select an OS or enter e to edit the commands before

booting. Enter c for a command line. The selected entry runs automatically in the operating system.

Grub bootloader example

GNU GRUB

version 2.02~beta2+e4a1fe391

+-------------------------------------------------+

|*ONIE: Install OS

| ONIE: Rescue

| ONIE: Uninstall OS

| ONIE: Update ONIE

| ONIE: Embed ONIE

| EDA-DIAG

+-------------------------------------------------+

Your switch comes with ONIE installed.

NOTE:

To access ONIE, use the RJ-45 console port.

ONIE example

ONIE: Install OS

For downloading and installing an OS from a URL

Starts ONIE with ONIE Discovery Service

(factory default boot)

ONIE: Rescue

Starts ONIE without ONIE Discovery Service

Useful for running Diagnostics manually

ONIE: Uninstall OS

Restore to factory defaults erases any installed OS

ONIE: Update ONIE

For downloading and updating ONIE from a URL

ONIE: Embed ONIE

For downloading and updating ONIE from a URL and erases any installed OS

During the initial setup, the switch boots to ONIE Install. ONIE Install boots with ONIE Discovery to the console, ONIE:.

NOTE:

For more information, see the Open Networking Hardware Diagnostic Guide.

NOTE:

After you have securely installed and powered on the S5148F-ON switch, to configure your switch, see your

third-party ONIE-compatible OS or the Dell EMC OS documentation.

/mnt/usb

vfat

defaults,rw,errors=remount-ro 0

defaults

Management ports