Dell EMC PowerSwitch Z9432F-ON 설정 매뉴얼 - 페이지 21

{카테고리_이름} Dell EMC PowerSwitch Z9432F-ON에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC PowerSwitch Z9432F-ON 27 페이지.

To remove the switch, remove the four screws from the L-brackets at the front of the rack and slide the switch forward.

To remove the rack rails from the rack, first remove the switch from the rack. Then remove the four outer rails screws at the

back of the rack.

DC power connections

Each DC PSU comes with one DC cable. The cable ships in a separate plastic bag.

CAUTION:

This product must be supplied by a DC power source rated -48 Vdc to -60 Vdc, 40 A minimum, and

Tma = 45-degree C minimum. The altitude of operation is 5000 m. The product must be supplied by a UL-Listed

DC power source that is separated from AC mains by double or reinforced insulation when the switch is

connected to DC power. For more information, contact your Dell sales representative.

NOTE:

You need a user-supplied Philips screwdriver to complete this installation.

Z9432F-ON switch installation