Dell Force10 MXL 10 GbE 시작하기 매뉴얼 - 페이지 12
{카테고리_이름} Dell Force10 MXL 10 GbE에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Force10 MXL 10 GbE 38 페이지. 10/40gbe blade switches
Dell Force10 MXL 10 GbE에 대해서도 마찬가지입니다: 매뉴얼 (27 페이지)
페이지 인쇄
Each plug-in module also contains LEDs that provide information about the
link status and traffic activity on a port (Figure 1-5).
Figure 1-5. Port LEDs on Modules
Table 1-2 describes the LED status of the 10GbE BASE-T, 10GbE SFP+, and
40GbE QSFP+ ports.
Ta b l e 1 - 2 .
P o r t L E D S t a t u s
Port LED
Color
Off
Green
Link Status
Yellow
Off
Activity
Blinking
Green
12
Hardware Overview
Meaning
The port is down.
The port is up and can transmit traffic at maximum
speed:
A QSFP+ port can transmit at 40G.
An SFP+ port can transmit at 10G.
A BASE-T port can transmit at 10G.
The port is up and is transmitting traffic at lower than
maximum speed:
A 40GbE QSFP+ port is transmitting at 10G.
A 10GbE SFP+ or 10GBASE-T port is transmitting at
1G or 100Mb.
No traffic is being transmitted or received on the port.
Traffic is being transmitted or received on the port.
Link Status
Activity
Link Status
Activity
Link Status
Activity