Dell N1108T-ON 시작하기 매뉴얼 - 페이지 24

{카테고리_이름} Dell N1108T-ON에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell N1108T-ON 27 페이지.

Finally, set up the default gateway. Please enter the

IP address of the gateway from which this network is

reachable. [0.0.0.0]: 10.1.1.1

This is the configuration information that has been

collected:

SNMP Interface = "public"@10.1.2.100

User Account setup = admin

Password = ********

VLAN1 Router Interface IP = 10.1.1.200 255.255.255.0

Default Gateway = 10.1.1.1

Step 6:

If the information is correct, please enter (Y) to

save the configuration and copy the settings to the

start-up configuration file. If the information is

incorrect, enter (N) to discard the configuration and

restart the wizard: [Y/N] y

Thank you for using the Dell Easy Setup Wizard. You

will now enter CLI mode.

Applying Interface configuration, please wait...

Next Steps

After completing the initial configuration described in this section, connect

any of the front-panel switch ports to a production network for in-band

remote management.

If you specified DHCP for the VLAN 1 management interface IP address, the

interface will acquire its IP address from a DHCP server on the network. To

discover the dynamically assigned IP address, use the console port connection

to issue the following command:

For the VLAN 1 routing interface, enter show ip interface.

•

To access the Dell OpenManage Switch Administrator interface, enter the

VLAN 1 management interface IP address into the address field of a Web

browser. For remote management access to the CLI, enter the VLAN 1

management interface IP address into a Telnet or SSH client. Alternatively,

continue to use the console port for local CLI access to the switch.

Getting Started Guide