Dell Networking 7024 참조 매뉴얼 - 페이지 17

{카테고리_이름} Dell Networking 7024에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Networking 7024 17 페이지. Expansion modules for dell networking switches

4.5

Dell Networking 62xx Series (6224, 6224P, 6224F, 6248, 6248P)

There are five different switch models in the Dell Networking 62xx series, each with two bays for expansion modules.

The rear view of the switch looks similar to the one shown in Figure 11. The yellow outlines show the two bays on the

left end of the switch.

Figure 11 Dell Networking 62xx Series Switch (1G Ethernet) and Available Modules

Dell Networking 6224, 6224P, 6224F, 6248, and 6248P switches support the same expansion modules as the Dell

Networking M6220 modular switch.

The stacking module only installs into Bay 1 (left bay when viewing from the back). The 10GBase-T module only

installs into Bay 2 (right bay when viewing from the back).

Both the stacking module and 10GE CX4 module can be configured to either role (Ethernet or Stacking). By default,

each module functions according to its module ID. Upon changing the role of a module, a reboot is required for the

changes to take effect. See the

Expansion Modules for Dell Networking Switches

Command Line Interface Guide

62xx

for instructions on how to change roles.