Dell Networking N3024F 펌웨어 업그레이드 - 페이지 4
{카테고리_이름} Dell Networking N3024F에 대한 펌웨어 업그레이드을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Networking N3024F 21 페이지. Expansion modules for dell networking switches
Dell Networking N3024F에 대해서도 마찬가지입니다: 참조 매뉴얼 (17 페이지)
페이지 인쇄
Upgrade Procedure Dell™ Networking
N2024/N2024P/N2048/N2048P/N3024/N3024F/N3024P/N3048/N3048P
Switches
Introduction
This
document
provides
N2024/N2024P/N2048/N2048P/N3024/N3024F/N3024P/N3048/N3048P switches to firmware version
6.0.1.3 or later.
IMPORTANT:
Dell Networking N2000 and N3000 Series switches support 6.0.1.3
or later firmware. Both Dell Networking N2000 and N3000 Series switches can
share the same firmware image version (N3000_N2000v6.0.1.3.stk)
IMPORTANT:
Administrators upgrading N2000 and N3000 series switches from
6.x.x.x to 6.0.1.3 of firmware MUST follow the instructions documented in this
procedure. Failure to follow the procedures described in that document when
upgrading from 6.x.x.x to 6.0.1.3 firmware may result in an inoperable switch!
IMPORTANT:
After upgrading the switch firmware version to 6.0.1.3, the boot
code update is required on N2000 and N3000 series switches via serial console if
switch is running with the older boot code version. The latest boot code version
available for N2000 and N3000 series switches is "U-Boot 2012.10-00076-g49fadd9
(Jan 23 2014 - 17:59:05)". Administrators upgrading N2000 and N3000 series
switches MUST follow the boot-code update instructions documented in this
procedure.
IMPORTANT:
Dell Networking N2000 and N3000 Series switches require firmware
version 6.0.1.3 or later.
Dell Networking N2000/N3000 Series
Dell Networking N2024
Dell Networking N2024,TAA
Dell Networking N2024P
Dell Networking N2024P,TAA
Dell Networking N2048
Dell Networking N2048,TAA
Dell Networking N2048P
Dell Networking N2048P,TAA
specific
procedures
Page 1
for
upgrading
the
P/N
P8K2V
GKDJ8
5RFWR
03RN0
DMD5F
W97YV
H3MDW
58RK5
Dell™
Networking