Dell Networking S5000 구성 매뉴얼 - 페이지 12

{카테고리_이름} Dell Networking S5000에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Networking S5000 17 페이지. Data center switch
Dell Networking S5000에 대해서도 마찬가지입니다: 설치 매뉴얼 (50 페이지), 구성 매뉴얼 (12 페이지), 시작하기 매뉴얼 (37 페이지)

페이지 인쇄

1. Enable Switch Ports

FTOS (conf-if-vl-vlan-id*)#tagged tengigabitethernet 0/0-47

Note: For the previous command, you must supply a valid range of populated ports. For example, if only

two Ethernet modules are installed, then the valid range would be: tengigabitethernet 0/0-23

FTOS (conf-if-vl-vlan-id*)#tagged port-channel 1

FTOS (conf-if-vl-vlan-id*)#exit

3.5

Configure DCB policies

FTOS(conf)#dcb-map profile-name

FTOS(conf-dcbmap-profile-name*)#priority-group 0 bandwidth 50 pfc off

FTOS(conf-dcbmap-profile-name*)#priority-group 1 bandwidth 50 pfc on

Note: The sum of the bandwidth percentages must be equal to 100.

FTOS(conf-dcbmap-profile-name*)#priority-pgid 0 0 0 0 1 0 0 0

FTOS(conf-dcb-profile-name*)#exit

3.6

Apply policies to switch ports

FTOS(conf)#interface range tengigabitethernet 0/0 – 47

FTOS(conf-if-range-te-0/0-47)#dcb-map profile-name

FTOS(conf-if-range-te-0/0-47)#exit

FTOS(conf)#interface range fortyGigE 0/48 - 60

FTOS(conf-if-range-fo-0/48-60)#dcb-map profile-name

FTOS(conf-if-range-fo-0/48-60)#exit

FTOS(conf)#exit

3.7

Save configuration

FTOS#copy running-config startup-config

3.8

Configure additional switches

Repeat the commands from Section 3 to configure DCB on additional switches.

SCG1007

Dell Networking S5000 Switch Configuration Guide for EqualLogic SANs