Dell Networking S6000 System 시작하기 매뉴얼 - 페이지 16

{카테고리_이름} Dell Networking S6000 System에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Networking S6000 System 37 페이지. Dell networking s6000 high-performance 10/40 gbe top-of-rack switch
Dell Networking S6000 System에 대해서도 마찬가지입니다: 테스트 보고서 (19 페이지)

페이지 인쇄

The S6000 supports splitting a single 40G QSFP+ port into four 10G SFP+ ports

using one of the supported breakout cables. When you use the fanout feature, the

40G QSFP+ port is deleted and four10G SFP+ ports are created.

QSFP+ ports have eight LEDs associated with each stack of two ports; four for

the top and four for the bottom ports. You can configure each port as a single

40G port or four10G ports. When configured as a 40G port, only the first of the

four LEDs is used. When configured as four 10G ports, all four LEDs are used

to indicate the status.

Table 3-2. 40G QSFP+/ 4x10G SFP+ Ethernet Port LEDs

Feature

Link/Activity LED

Table 3-3. Management Ethernet Port LEDs

Feature

Link LED

Activity LED

Hardware Overview

Table 3-2

lists the LED status.

Detailed Description

• Off – No Link

• Blinking green – Transmit/Receive is active

• Solid green – Link up at 40Gbps/10Gbps speed

Detailed Description

• Off – No Link

• Solid green –Link on 10/100M/1G speed

• Off – No Link

• Blinking green – Transmit/Receive is active