Dell PowerConnect 2224 기술 사양 업데이트
{카테고리_이름} Dell PowerConnect 2224에 대한 기술 사양 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 2224 2 페이지. Technical specifications update for the dell powerconnect 2200/2300 series ethernet switches
Dell PowerConnect 2224에 대해서도 마찬가지입니다: 사용자 설명서 (38 페이지), 사용자 설명서 (24 페이지)
페이지 인쇄
K5672A00.fm Page 1 Friday, February 20, 2004 3:45 PM
Dell™ PowerConnect™ 2200/2300 Series Ethernet Switches
Introduction
This document describes changes to the technical specifications of the PowerConnect 2200/2300
series Ethernet switches. This information replaces and supercedes that found in the Dell
PowerConnect 2216/2224/2324 Switches User's Guide. Where any differences exist in the
specifications or procedures between the two documents, the information in this document is
more accurate.
Product Specifications
•
PowerConnect 2216
–
Provides 16 ports supporting 10/100Base-T Ethernet.
–
All ports support full- or half-duplex mode and PAUSE frames.
•
PowerConnect 2224
–
Provides 24 ports supporting 10/100Base-T Ethernet.
–
All ports support full- or half-duplex mode and PAUSE frames.
•
PowerConnect 2324
–
Provides 24 ports supporting 10/100Base-T Ethernet and an additional 2 ports supporting
1000Base-T Ethernet.
–
The 10/100Base-T ports support full- or half-duplex mode; the 1000Base-T ports support
full-duplex mode only.
–
The 10/100Base-T ports support PAUSE frames; the 1000Base-T ports do not support
PAUSE frames.
Front-Panel Indicators
1000Base-T Ports Link/Activity (SPD/LNK/ACT) LED (PowerConnect 2324 only)
•
Steady green — A 1000 Mbps link has been established, but no data is being transmitted
or received.
•
Blinking green — A 1000 Mbps link has been established and data is being transmitted
or received.
•
Off — No link has been established.
NOTE:
No link will will be detected if a 10/100Base-T device is connected to a 1000Base-T port (ports 25
and 26) on the PowerConnect 2324 switch.
February 2004
0K5672A00