Dell PowerConnect 2624 사용자 설명서 - 페이지 4

{카테고리_이름} Dell PowerConnect 2624에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 2624 21 페이지. Powerconnect 26 series
Dell PowerConnect 2624에 대해서도 마찬가지입니다: 사용자 설명서 (38 페이지)

페이지 인쇄
Dell PowerConnect 2624 사용자 설명서
 

Connecting Devices

 
RJ-45 Switch Ports
 
RJ-45 connectors are located on the front panel of the switch.
 
NOTE:
Ensure that Category 5E (CAT 5E) cabling is used for connecting devices at 1000-Mbps Gigabit Ethernet speed.
 
All ports can negotiate full- and half-duplex modes automatically. These switching ports allow users to connect the switches to 10Base-T, 100Base-TX and
1000Base-T devices.
 

SFP Port

 
On the 24-port switch, you can use the SFP port to connect to a device that is more than 100 meters away. However, using the SFP port disables the RJ-45
connector of port 24 on the switch.
 

Connecting Switches to Each Other

 
Each port supports Auto MDI and MDIX functionality. When cascading with other switches or hubs, each port can connect directly to a switch or hub with
straight-through twisted-pair cable (see Figure 1-4).
 
NOTE:
Do not connect two switches together with more than one cable. Using multiple cables to connect switches can create a loop and cause
collisions.
Figure 1-4. Cascading Switches