Dell PowerConnect 3248 매뉴얼 - 페이지 23

{카테고리_이름} Dell PowerConnect 3248에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 3248 42 페이지. Powerconnect 3248; powerconnect 5224
Dell PowerConnect 3248에 대해서도 마찬가지입니다: 기능 목록 (2 페이지), 사양 (2 페이지)

페이지 인쇄
Dell PowerConnect 3248 매뉴얼
The following figure is representative of PowerConnect 5224.
Switch 5224: Re-Enabling a Shutdown Port
If security is enabled on a port and you set the intrusion action to Trap and
Shutdown, a security violation causes the port to be disabled. To re-enable a
shutdown port, follow these steps:
Click the Ports/Port Configuration page.
1
For the port that is disabled, click the check box in the Admin/Oper
2
column.
Click Apply Changes to enable the port.
3
Switch 5224: CLI Commands
The following table summarizes the equivalent CLI commands for items in
the Ports/Port Security pages.
Command
port security
Usage
Enables port security on an interface.
The no form command disables port security.
Addendum to the 3 248 and 52 24 User 's Guides
NOTE: To re-enable a
port using the CLI, use
the no shutdown
command in Interface
Configuration mode.
23