Dell PowerConnect 3248 매뉴얼 - 페이지 30
{카테고리_이름} Dell PowerConnect 3248에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 3248 42 페이지. Powerconnect 3248; powerconnect 5224
Dell PowerConnect 3248에 대해서도 마찬가지입니다: 기능 목록 (2 페이지), 사양 (2 페이지)
페이지 인쇄
30
Addendum to the 32 48 and 5 224 User 's Guides
Advanced Bridge Settings
From the Advanced Bridge Settings page, under Attributes, you can
configure the following parameters:
•
Path Cost Method — The path cost is used to determine the best
path between devices. The path cost method is used to determine the
range of values that can be assigned to each interface.
–
Long: Specifies 32-bit based values that range from 1-200,000,000.
–
Short: Specifies 16-bit based values that range from 1-65535.
(This is the default.)
•
Transmission Limit — The maximum transmission rate for BPDUs is
specified by setting the minimum interval between the transmission of
consecutive protocol messages. (Range: 1-10; Default: 3)
To save any changes you make in this page, click Apply Changes. If you do
not want to save the changes, click Refresh.
The following figure is representative of PowerConnect 3248 and 5224.