Dell PowerConnect 3248 매뉴얼 - 페이지 6
{카테고리_이름} Dell PowerConnect 3248에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 3248 42 페이지. Powerconnect 3248; powerconnect 5224
Dell PowerConnect 3248에 대해서도 마찬가지입니다: 기능 목록 (2 페이지), 사양 (2 페이지)
페이지 인쇄
6
Addendum to the 32 48 and 5 224 User 's Guides
CLI Commands
The following table summarizes the equivalent CLI commands for items in
the Switch/General/System Logs page.
Command
logging on
logging history {flash |
ram} level
show logging {flash | ram
| trap}
E x a m p l e
Console(config)#logging on
Console(config)#logging history ram 0
Console(config)#
Console#show logging flash
Syslog logging: Disable
History logging in FLASH: level errors
Console#
Remote Logs Configuration
The Switch/General/Remote Logs page allows you to configure the logging
of messages that are sent to syslog servers or other management stations.
You can also limit the error messages sent to messages of a specified level.
Usage
Controls the logging of debug or error messages to
a logging process.
The no form command disables the logging
process.
Limits syslog messages saved to switch memory
based on severity.
The no form command returns the logging of
syslog messages to the default level.
flash — event history stored in flash memory
(permanent memory)
ram — event history stored in temporary RAM
(memory flushed on power reset)
Displays the logging configuration for system and
event messages