Dell PowerConnect 8024 펌웨어 업그레이드 - 페이지 18

{카테고리_이름} Dell PowerConnect 8024에 대한 펌웨어 업그레이드을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 8024 24 페이지. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Dell PowerConnect 8024에 대해서도 마찬가지입니다: 릴리스 정보 (27 페이지), 릴리스 정보 (20 페이지), 구성 매뉴얼 (21 페이지)

Dell PowerConnect 8024 펌웨어 업그레이드
Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or
4.x.x.x or 5.x.x.x to 5.1.9.3 Firmware
2. Download the 5.1.9.3 firmware from a TFTP server.
console#copy tftp://10.10.10.200/PCM6220v5.1.9.3.stk image
Transfer Mode.................................. TFTP
Server IP Address.............................. 10.10.10.200
Source File Path............................... /
Source Filename................................ PCM6220v5.1.9.3.stk
Data Type...................................... Code
Destination Filename........................... image
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
TFTP code transfer starting
11517952 bytes transferred
Verifying CRC of file in Flash File System
Unpacking the image file.
Distributing the code to the members of the stack!
File transfer operation completed successfully.
console#show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
--------------------------------------------------------------------
unit
image1
--------------------------------------------------------------------
1
5.1.9.3
3. Activate the
5.1.9.3
console#boot system image1
Activating image image1 ..
4. Update the boot code and reboot the switch.
console#update bootcode
Update bootcode and reset (Y/N)?y
Updating boot code ...
BootCode from image1
..........................................................................................
..........................................................................................
..........................................................................................
..........................................................................................
..........................................................................................
..........................................................................................
..........................................................................................
..........................................................................................
..........................................................................................
..........................................................................................
..........................................................................................
..................................BCM56314 DEV REV ID = 0001b314
a.
If using the serial port to update the firmware, the following output will be observed. If logged in
via telnet or SSH, rebooting the switch will close the connection. Rebooting may take several
minutes to complete and the switch may reboot itself autonomously during the upgrade procedure.
image2
current-active
2.2.0.3
image2
firmware
Page 15
next-active
image2