3 Day Blinds VERTICAL BLINDS 시작하기 - 페이지 2

{카테고리_이름} 3 Day Blinds VERTICAL BLINDS에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. 3 Day Blinds VERTICAL BLINDS 10 페이지.

페이지 인쇄

VALANCE ASSEMBLY

STANDARD VALANCE

Dust Cover

CURVED VALANCE, FABRIC INSERT

Fabric

Insert

Corner End Cap

Groove

Rounded Corner

| Vertical Blinds

To Assemble the Valance:

• Insert vinyl inserts into the

valance returns.

• Attach valance returns to

the valance using the closed

valance corner.

To Assemble The Valance:

Note: The ordered fabric has

already been inserted into the

valance.

• Insert one end of the

rounded corner into the

valance and the other into

the valance return. Note that

the valance returns have a

slot that also clips into the

valance dust cover edge.

• Slide the fabric insert to the

end of each, then peel off

the protective cover on the

double sided tape and stick

to fabric.

• Push the corner End Caps

into place on the top and

bottom of the rounded

corner.

• Repeat the above process

for the other end of the

valance. (Excess material

may need to be trimmed

from returns. Simply use

scissors.)

CURVED VALANCE, VINYL INSERT

To Assemble The Valance: Vinyl Insert

Note: For PVC insertion, trim off the excess with a utility knife

by scoring the back of the insertion and snap it off .

• The ordered vinyl have

already been inserted into

the valance.

• Insert the valance returns

into the rounded corner

pieces.

• Slice the vinyl insert to the

end of each return, then peel

off the protective cover on

the double sided tape and

paste in the vinyl.

• Insert the four plastic End

Caps top and bottom corners

and push to secure entire

valance

Valance is ready to be installed