Dell PowerConnect 8164F 구성 매뉴얼 - 페이지 5

{카테고리_이름} Dell PowerConnect 8164F에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect 8164F 17 페이지. Powerconnect 8100 series high-performance 10/40 gbe enterprise switches
Dell PowerConnect 8164F에 대해서도 마찬가지입니다: 사양 (3 페이지)

페이지 인쇄

Introduction

This document illustrates how to configure Dell™ Networking 4000 Series and Dell PowerConnect 8100

switches for use with EqualLogic™ PS Series storage using Dell best practices. The recommended

configuration uses link aggregation groups (LAGs) for inter-switch connections. Optional steps are

provided in Section 3 to enable Data Center Bridging (DCB).

If you are following the Rapid EqualLogic Configuration steps at

http://en.community.dell.com/techcenter/storage/w/wiki/3615.rapid-equallogic-configuration-portal-

by-sis.aspx, use Sections 1 and 2 in this Switch Configuration Guide.

For more information on EqualLogic SAN design recommendations, see the EqualLogic Configuration

Guide at:

http://en.community.dell.com/dell-

groups/dtcmedia/m/mediagallery/19852516/download.aspx.

1.1

Audience

This switch configuration guide describes an optimal configuration following Dell best practices for an

EqualLogic iSCSI SAN and is intended for storage or network administrators and deployment personnel.

1.2

Switch details

The table below provides an overview of the switch configuration.

Table 1

Switch vendor

Switch model

Switch firmware

The latest firmware updates and documentation can be found at: support.dell.com.

SCG1001

Dell Networking N4000 Series and Dell PowerConnect 8100 Series Configuration Guide

Switch specifications

Dell Networking N4000 Series or Dell PowerConnect 8100

Dell

Dell Networking N4032, N4032F, N4064, N4064F

Dell PowerConnect 8132, 8132F, 8164, 8164F

6.0.1.3 and later