Dell PowerConnect BI-RX-4 시작하기 매뉴얼 - 페이지 10
{카테고리_이름} Dell PowerConnect BI-RX-4에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect BI-RX-4 32 페이지. Powerconnect b-rx series
페이지 인쇄
Power precautions
CAUTION
Use a separate branch circuit for each AC power cord, which provides redundancy in case one of the
circuits fails.
CAUTION
Make sure to choose the appropriate circuit device, depending on the number of AC power supplies
installed in the chassis.
DANGER
Disconnect the power cord from all power sources to completely remove power from the device.
DANGER
Make sure that the power source circuits are properly grounded, then use the power cord supplied with
the device to connect it to the power source.
DANGER
If the installation requires a different power cord than the one supplied with the device, make sure you
use a power cord displaying the mark of the safety agency that defines the regulations for power cords in
your country. The mark is your assurance that the power cord can be used safely with the device.
DANGER
Make sure the rack or cabinet housing the device is adequately secured to prevent it from becoming
unstable or falling over.
DANGER
Mount the devices you install in a rack or cabinet as low as possible. Place the heaviest device at the
bottom and progressively place lighter devices above.
10
PowerConnect B-RX Series Getting Started Guide
53-1001682-03