Dell PowerConnect BI-RX-8 시작하기 매뉴얼 - 페이지 12

{카테고리_이름} Dell PowerConnect BI-RX-8에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect BI-RX-8 32 페이지. Powerconnect b-rx series

Unpacking the PowerConnect B-RX Series

The PowerConnect B-RX Series ships with several items. Review the list below, and verify the contents. If any items

are missing, contact the place of purchase:

•

PowerConnect B-RX Series chassis with the appropriate number of switch fabric modules already installed in the

slot marked SF and a slot blank installed in all other module slots.

NOTE

You must provide standard #12-24 pan-head screws for mounting the PowerConnect B-RX Series chassis into a rack.

•

Web Pointer card containing software images and the user documentation (including this guide).

•

Warranty card.

•

A 115V AC power cable for each AC power supply you purchase from Dell.

Follow the steps given below to unpack a PowerConnect B-RX Series chassis.

1. Move the pallet to a staging area as close to the installation site as possible.

2. Position the shipping carton with the arrows pointing up.

3. Remove the strap that secures the shipping carton to the pallet.

4. Remove the plastic cover and shipping carton.

5. Save the shipping carton, pallet, and packing materials in case you need to move or ship the chassis at a later

time.

DANGER

A fully-populated PowerConnect B-RX Series chassis is heavy. TWO OR MORE PEOPLE ARE REQUIRED

WHEN LIFTING, HANDLING, OR MOUNTING THESE DEVICES.

Follow these guidelines for lifting and moving a PowerConnect B-RX Series chassis:

•

Before lifting or moving the switch, disconnect all external cables.

•

Do not attempt to lift a fully configured PowerConnect B-RX Series eight-slot or 16-slot chassis by yourself. Using

a mechanical lift to maneuver the switch into a rack is recommended. If a lift cannot be used, a minimum of four

people must lift the switch, and you must remove components from the chassis before lifting.

53-1001682-03