Dell PowerConnect M8024 구성 매뉴얼 - 페이지 5

{카테고리_이름} Dell PowerConnect M8024에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect M8024 21 페이지. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Dell PowerConnect M8024에 대해서도 마찬가지입니다: 릴리스 노트 (9 페이지), 릴리스 정보 (27 페이지), 펌웨어 업그레이드 (24 페이지)

페이지 인쇄

Introduction

This document shows how to configure Dell™ PowerConnect™ 8024, 8024F, M8024, and M8024-k

switches for use with EqualLogic™ PS Series storage using Dell best practices. The recommended

configuration uses link aggregation groups (LAGs) for inter-switch connections. An optional configuration

is provided for 8024 and 8024F switches using the virtual stacking feature.

For more information on EqualLogic SAN design recommendations, see the EqualLogic Configuration

Guide at:

http://en.community.dell.com/dell-

groups/dtcmedia/m/mediagallery/19852516/download.aspx.

1.1

Audience

This switch configuration guide describes an optimal configuration following Dell best practices for an

EqualLogic iSCSI SAN and is intended for storage or network administrators and deployment personnel.

1.2

Switch details

The table below provides an overview of the switch configuration.

Table 1

Switch vendor

Switch model

Switch firmware

Note: For proper functionality, the switch must be at the switch firmware version shown in the table

above before proceeding with this configuration. Using previous firmware versions may have

unpredictable results.

The latest firmware updates and documentation can be found at: support.dell.com.

SCG1008

PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs

Switch specifications

Dell PowerConnect 8024, 8024F, M8024, and M8024-k

Dell PowerConnect

PowerConnect 8024, PowerConnect 8024F, PowerConnect

M8024, PowerConnect M8024-k

5.1.1.7 and later