Dell PowerConnect M8024-F 구성 매뉴얼 - 페이지 15

{카테고리_이름} Dell PowerConnect M8024-F에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect M8024-F 21 페이지. For equallogic sans

Optional virtual stack configuration for 8024 and 8024F

Note: If you wish to use a virtual stack configuration instead of LAG, follow the instruction below instead

of section 2 or 3.

One advantage of stacked switches is that they can be managed as a single switch; however firmware

updates will update all members of the stack simultaneously and therefore should only be done during

planned downtime.

Do not connect the cables between the stacked switches (this will be done in a later step).

On both switches, enter the following commands:

4.1

console>enable

console#show version

Note: If the active version displayed is not 5.1.1.7 or later, please visit support.dell.com and download the

latest update for your switches.

4.2

Note: All configuration settings will be deleted

console#clear config

console>enable

console#copy running-config startup-config

console#reload

Are you sure you want to reload the stack? (y/n) y

Note: The switch will reboot.

On the first switch only, proceed with the following steps:

SCG1008

PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs