Dell PowerConnect PC7024P 스태킹 지침 - 페이지 11

{카테고리_이름} Dell PowerConnect PC7024P에 대한 스태킹 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect PC7024P 37 페이지. Stacking gigabit ethernet switches
Dell PowerConnect PC7024P에 대해서도 마찬가지입니다: 기술 백서 (34 페이지)

페이지 인쇄
Dell PowerConnect PC7024P 스태킹 지침
Stacking Dell PowerConnect 7000 Series Switches

Manual Update

You can perform firmware updates on the stack by using the CLI or the Web interface. From the CLI,
use the copy ftp command, which uses the FTP protocol for file transfer. To update the firmware by
using the Web interface, use the options available on the System > File Management > File Download
from Server page.
NOTE: When stacked, the PC7000 switches require that the same version of firmware be installed on
every switch member.
When connected in stack, the copy ftp or copy tftp commands will distribute the downloaded
image to all the connected units of the stack.
In the following output, the image with a file name of image.stk is downloaded from the FTP server
with an IP address of 10.27.64.141.
console#copy ftp ftp://10.27.64.141/image.stk image user admin password
test1234
Mode........................................... FTP
FTP Server IP.................................. 10.27.64.141
FTP Path.......................................
FTP Filename................................... PC7000_4.0.0.6.stk
Data Type...................................... Code
Destination Filename........................... image
Page 9