Dell PowerConnect PC7048R 기술 백서 - 페이지 11

{카테고리_이름} Dell PowerConnect PC7048R에 대한 기술 백서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect PC7048R 34 페이지. Stacking gigabit ethernet switches
Dell PowerConnect PC7048R에 대해서도 마찬가지입니다: 스태킹 지침 (37 페이지)

페이지 인쇄

Stacking Dell PowerConnect 7000 Series Switches

To configure the standby unit via the Web interface, view the Stacking > Unit Configuration page and

select Standby for the Unit Type.

Updating the Firmware on a Stack

Automatic Update

By default, firmware synchronization is performed automatically when a unit is powered up on a stack.

Because firmware synchronization makes no attempt to check for the latest version of firmware, the

following procedure is recommended for bringing all members of a stack onto the same version of

code.

NOTE: Schedule some downtime as this process will reset the entire stack and affect all stack users.

1. Use the following commands to enable firmware synchronization, if needed, and write the

running configuration to the saved configuration:

console#boot auto-copy-sw

console#copy nvram:config copy system:running-config nvram:startup-

config

2. Load the more recent firmware image onto the stack master as the backup image.

3. Set the stack master to reboot from the new image:

console#boot system backup

Page 9