Dell PowerConnect W-AP105 매뉴얼 - 페이지 12

{카테고리_이름} Dell PowerConnect W-AP105에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect W-AP105 45 페이지. Powerconnect w-ap104 and w-ap105 access points
Dell PowerConnect W-AP105에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지), 설치 매뉴얼 (2 페이지), 사양 (2 페이지), 사양 (2 페이지), 사양 (4 페이지), 설치 매뉴얼 (2 페이지)

Dell PowerConnect W-AP105 매뉴얼

2.3.1 Physical Description

The Aruba AP-105 Access Point is a multi-chip standalone cryptographic module consisting of hardware
and software, all contained in a hard plastic case. The module contains two dual-band 2.4-GHz/5-GHz
802.11 a/b/g/n transceivers, and 4 x integrated, omni-directional antenna elements (supporting up to 2x2
MIMO with spatial diversity).
The plastic case physically encloses the complete set of hardware and software components and represents
the cryptographic boundary of the module.
The Access Point configuration tested during the cryptographic module testing included:
Aruba Part Number
AP-105-F1
The exact firmware versions tested were:
ArubaOS_6xx_6.1.2.3-FIPS
Dell_PCW_6xx_6.1.2.3-FIPS
2.3.1.1

Dimensions/Weight

The AP has the following physical dimensions:
132 mm x 135 mm x 45 mm (5.2" x 5.3" x 1.8")
0.3 kg (10.56 oz)
2.3.1.2

Interfaces

The module provides the following network interfaces:
1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX
Antenna (internal)
1 x RJ-45 console interface
The module provides the following power interfaces:
48 V DC 802.3af power over Ethernet
12 V DC for external AC supplied power (adapter sold separately)
2.3.1.3

Indicator LEDs

There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 4- AP-105 Indicator LEDs
Label
Function
PWR
AP power / ready status
Dell Corresponding Part Number
W-AP105-F1
Action
Off
Red
Flashing – Green
On – Green
12
Status
No power to AP
Initial power-up condition
Device booting, not ready
Device ready