Dell PowerConnect W-AP105 매뉴얼 - 페이지 8
{카테고리_이름} Dell PowerConnect W-AP105에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerConnect W-AP105 45 페이지. Powerconnect w-ap104 and w-ap105 access points
Dell PowerConnect W-AP105에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지), 설치 매뉴얼 (2 페이지), 사양 (2 페이지), 사양 (2 페이지), 사양 (4 페이지), 설치 매뉴얼 (2 페이지)
페이지 인쇄
The exact firmware versions tested were:
ArubaOS_6xx_6.1.2.3-FIPS
Dell_PCW_6xx_6.1.2.3-FIPS
2.1.1.1
Dimensions/Weight
The AP has the following physical dimensions:
120 mm x 130 mm x 35 mm (4.7" x 5.1" x 1.4")
255 g (9 oz)
2.1.1.2
Interfaces
The module provides the following network interfaces:
1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX
Antenna
o
2x RP-SMA antenna interfaces (supports up to 2x2 MIMO with spatial diversity)
1 x RJ-45 console interface
The module provides the following power interfaces:
48 V DC 802.3af power over Ethernet
12 V DC for external AC supplied power (adapter sold separately)
2.1.1.3
Indicator LEDs
There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 2- AP-92 Indicator LEDs
Label
Function
PWR
AP power / ready status
ENET
Ethernet Network Link
Status / Activity
11b/g/n
2.4GHz Radio Status
Action
Status
Off
No power to AP
Red
Initial power-up condition
Flashing – Green
Device booting, not ready
On – Green
Device ready
Off
Ethernet link unavailable
On – Amber
10/100Mbs
negotiated
On – Green
1000Mbs Ethernet link negotiated
Flashing
Ethernet link activity
Off
2.4GHz radio disabled
On – Amber
2.4GHz radio enabled in WLAN
mode
8
Ethernet
link