Dell PowerEdge 4600 매뉴얼 - 페이지 16
{카테고리_이름} Dell PowerEdge 4600에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4600 19 페이지. Poweredge 4600
Dell PowerEdge 4600에 대해서도 마찬가지입니다: 정보 업데이트 (14 페이지), 업데이트 매뉴얼 (42 페이지), 매뉴얼 (48 페이지), 설치 매뉴얼 (42 페이지), 제거 매뉴얼 (28 페이지), 설치 매뉴얼 (28 페이지), 매뉴얼 (15 페이지), 사양 (2 페이지)
페이지 인쇄
Install the four metal feet:
3
Insert the two tabs of the metal feet into the slots on the chassis and trim panel
a
(see Figure 1-8).
Secure the metal feet to the chassis and trim panel with four 6-32 x 0.25-inch
b
hex-head Phillips screws (see Figure 1-8).
F i g u r e 1 - 8 .
A t t a c h i n g t h e M e t a l Fe e t
Position the tower bezel so that it is perpendicular to the system (see Figure 1-9).
4
Retract and lock the retaining pins in the bezel's hinge halves.
5
Rotate the retaining pins in their grooves to release the pins into their mating hinge
6
halves.
Reinstall the hard drives in their labeled slots in the drive bay (see your Installation
7
and Troubleshooting Guide for instructions).
Reinstall the power supplies (see your Installation and Troubleshooting Guide for
8
instructions).
Close the bezel.
9
metal feet (4)
6-32 x 0.25-inch
tabs (2)
hex-head Phillips
screws (4)
Rac k - t o -To w e r C o n v e r s io n G u i d e
1-13