Dell PowerEdge 6400 매뉴얼 - 페이지 4

{카테고리_이름} Dell PowerEdge 6400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 6400 10 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 6400에 대해서도 마찬가지입니다: 랙 설치 (37 페이지), 업그레이드 설치 매뉴얼 (42 페이지), 랙 설치 (34 페이지), 설치 매뉴얼 (42 페이지), 설치 매뉴얼 (37 페이지), 설치 (4 페이지), 조립 및 설치 (32 페이지), 매뉴얼 (10 페이지), 매뉴얼 (15 페이지)

페이지 인쇄

SCSI Backplane Option

7 .

Disconnect the flat data cable from the locking connector on the backplane

board.

Disconnect the power cable labeled "HD-B/P" from the power connector on the

backplane board.

To release the connector, press the latch on the side of the connector.

Disconnect the fan power cable from the power connector labeled "FAN" on the

backplane board.

To release the connector, press the latch on the side of the connector.

10. Loosen the captive thumbscrew on the backplane board.

11. Slide the SCSI backplane board away from the chassis inner wall approximately

1 centimeter (cm) (a quarter inch), and then lift the board off of the L-shaped

mounting tabs and away from the chassis (see Figure 1).

Thumbscrew

SCSI backplane board