Dell PowerEdge M420 기술 매뉴얼 - 페이지 19

{카테고리_이름} Dell PowerEdge M420에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge M420 48 페이지. Dell poweredge blade servers getting started guide
Dell PowerEdge M420에 대해서도 마찬가지입니다: 정보 업데이트 (38 페이지), 릴리스 정보 (27 페이지), 매뉴얼 (25 페이지), 사용자 설명서 (23 페이지), 중요 정보 매뉴얼 (35 페이지), 업데이트 매뉴얼 (32 페이지), 업데이트 매뉴얼 (28 페이지), 사용자 설명서 (26 페이지), 사용자 설명서 (22 페이지), 시작하기 매뉴얼 (12 페이지), 매뉴얼 (38 페이지), 기술 매뉴얼 (46 페이지), 포트폴리오 매뉴얼 (27 페이지), 시작하기 매뉴얼 (14 페이지), 시작하기 매뉴얼 (12 페이지)

페이지 인쇄
Dell PowerEdge M420 기술 매뉴얼
The M420 server supports the DIMMs listed in Table 7. For the latest information on supported
memory, visit Dell.com/PowerEdge.
Capacity
(GB)
2
2
4
4
4
4
8
8
16
16
32

Memory configurations

The M420 server supports flexible memory configurations ranging from capacities of 2GB to 192GB,
and up to 3 DIMMs per processor (up to 6 DIMMs in a dual-processor configuration). Each
processor has three memory channels, with each channel supporting a single DIMM.
Flexible memory configuration
The M420 supports a flexible memory configuration, according to the following basic rules:
Speed: If DIMMs of different speeds are mixed, all channels across all processors operate at the
slowest DIMM's common frequency.
The following additional memory-population guidelines also apply to the M420:
A single quad-rank (QR) DIMM, dual-rank (DR), or single-rank (SR) DIMM may be populated on
each channel.
DIMMs should be installed with largest rank count to smallest. For example, if DR DIMMS are
mixed with SR DIMMs, DR DIMMS should be placed in the lowest DIMM slots, followed by the SR
DIMMs.
For more information on memory configuration and population, see the
Systems Owner's Manual

Memory speed

The M420 supports memory speeds of up to 1600MT/s, depending on the DIMM types installed and
the configuration. All memory on all processors and channels run at the same speed and voltage. By
default, the system runs at the highest speed for the channel with the lowest DIMM voltage and
speed. The operating speed of the memory is also determined by the maximum speed supported by
PowerEdge M420 Technical Guide
19
Table 7.
Speed
Type
(MT/s)
1600
RDIMM
1600
UDIMM
1600
RDIMM
1600
RDIMM
1600
UDIMM
1600
UDIMM
1600
RDIMM
1600
RDIMM
1600
RDIMM
1333
RDIMM
1333
RDIMM
on Dell.com/Support/Manuals.
DIMMs supported
Ranks
Data
per
SDDC support
width
DIMM
1
x8
Advanced ECC
1
x8
Advanced ECC
2
x8
Advanced ECC
1
x4
All modes
2
x8
Advanced ECC
1
x8
Advanced ECC
1
x4
All modes
2
x4
All modes
2
x4
All modes
2
x4
All modes
4
x4
All modes
Voltage
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
Dell PowerEdge M420