Allied Telesis AR740 RPS 빠른 설치 매뉴얼 - 페이지 4

{카테고리_이름} Allied Telesis AR740 RPS에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AR740 RPS 6 페이지. Ar700 series router
Allied Telesis AR740 RPS에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (13 페이지)

페이지 인쇄

Selecting a Site

The RPS unit can be installed in a standard 19-inch rack or on a level surface

such as a desktop or bench. When installing the RPS, choose a site that:

■

Allows adequate airflow around the RPS vents. If RPS units are stacked on

top of each other, their rubber feet must be fitted.

■

Is free of dust and moisture.

■

Will allow the RPS to operate within a temperature range of 0 ºC to 40 ºC

(32 ºF to 104 ºF) and a humidity range of 5% to 95% non-condensing.

■

Has a reliable and earthed (grounded), preferably dedicated and filtered,

power supply circuit.

■

Allows easy access to the RPS cable connections.

■

Will allow the RPS to be connected to a power supply and its routers, using

the supplied cables.

Installing the RPS

This equipment must be earthed.

Follow these steps to install the RPS:

Read the safety information.

For safety information, see the Safety and Statutory Information booklet. A

copy of this booklet is supplied with the RPS, and can also be found at

http://www.alliedtelesis.co.uk/en-gb/support/downloads/

Gather the tools and equipment you will need.

To install the RPS in a rack you will need a screwdriver, screws to attach

the rack-mount brackets to the rack, and cage nuts.

You will also need the cables that were packed with the RPS.

Choose a suitable site for the RPS.

Either a flat surface or 19 inch rack.

Unpack the RPS.

Verify the package contents. If any items are damaged or missing, contact

your sales representative.

AR740 RPS

C613-04025-01 REV F