Dell PowerEdge M610x 설치 매뉴얼

{카테고리_이름} Dell PowerEdge M610x에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge M610x 7 페이지. Dell poweredge blade servers getting started guide
Dell PowerEdge M610x에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (44 페이지), 업데이트 매뉴얼 (21 페이지), 업데이트 매뉴얼 (14 페이지), 시작하기 매뉴얼 (12 페이지), 시작하기 매뉴얼 (12 페이지), 포트폴리오 매뉴얼 (27 페이지), 기술 매뉴얼 (48 페이지), 시작하기 매뉴얼 (14 페이지), 시작하기 매뉴얼 (12 페이지)

Processor Heat Sink

Installation Information

NOTICE:

Only trained service technicians are authorized to remove the system cover

and access any of the components inside the system. See your Product Information

Guide for complete information about safety precautions, working inside the computer,

and protecting against electrostatic discharge.

NOTICE:

The processor and heat sink can become extremely hot. Be sure the

processor has had sufficient cooling time to cool before handling.

Do not over-tighten the heat sink retention screws when installing the heat sink.

To prevent over-tightening, Dell recommends that you tighten the retention

screw until resistance is felt and stop once the screw is seated. The screw tension

should be no more than 6 in-lb (6.9 kg-cm).

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the

marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.

November 2007