Dell PowerEdge M710 정보 업데이트 - 페이지 2

{카테고리_이름} Dell PowerEdge M710에 대한 정보 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge M710 38 페이지. Dell poweredge blade servers getting started guide
Dell PowerEdge M710에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (44 페이지), 업데이트 매뉴얼 (21 페이지), 업데이트 매뉴얼 (14 페이지), 설치 매뉴얼 (7 페이지), 업데이트 매뉴얼 (1 페이지), 시작하기 매뉴얼 (12 페이지), 시작하기 매뉴얼 (12 페이지), 기술 매뉴얼북 (31 페이지), 포트폴리오 매뉴얼 (27 페이지), 시작하기 매뉴얼 (14 페이지), 시작하기 매뉴얼 (12 페이지)

Low Voltage Memory Modules (DDR3L DIMMs)

Intel Xeon 5600 series processors support DDR3L DIMMs enabling a lower

operating voltage (1.35 V) that ensures memory power savings up to 20% per

DIMM. DDR3L memory is backward-compatible to Intel Xeon 5500 series and

operates at standard voltage (1.5 V) without any limitations.

Operating the system memory at a lower voltage may cause restrictions to

additional frequency and memory population capabilities. For example,

populating three memory modules per channel is not supported at 1.35 V.

Systems with 1.35 V DDR3L memory operates the memory modules at 1.5 V

if any of the following conditions exist:

•

Intel Xeon 5500 series processors

•

Two 1333 MHz DIMMs per channel

•

A combination of both standard and low voltage memory modules

For information on the memory configuration guidelines, see your system's

Hardware Owner's Manual at support.dell.com/manuals.

NOTE:

BIOS setup options allow the user to control frequency and voltage

configuration within allowable limits.

New BIOS Setup Options

Integrated Devices Screen

Option

SR-IOV-Global Enable

(Disabled default)

Description

Enables/disables BIOS configuration of Single Root

I/O Virtualization (SR-IOV) devices.

NOTE:

Applies to PowerEdge R410, R510, R610, R710, R910,

T410, T610, and T710 systems only.