Dell PowerEdge M710HD 시작하기 매뉴얼 - 페이지 6

{카테고리_이름} Dell PowerEdge M710HD에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge M710HD 12 페이지. Dell poweredge blade servers getting started guide
Dell PowerEdge M710HD에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (44 페이지), 업데이트 매뉴얼 (21 페이지), 업데이트 매뉴얼 (14 페이지), 설치 매뉴얼 (7 페이지), 업데이트 매뉴얼 (1 페이지), 시작하기 매뉴얼 (12 페이지), 포트폴리오 매뉴얼 (27 페이지), 시작하기 매뉴얼 (14 페이지), 시작하기 매뉴얼 (12 페이지)

페이지 인쇄
Dell PowerEdge M710HD 시작하기 매뉴얼
Connecting The System To Power
Figure 6. Connecting Power to the System
Connect the system's power cables to the system power supplies.
CAUTION: To prevent the power cables from being disconnected accidentally, use the plastic clip on each power
supply to secure the power cable to the power supply, and use the strap to secure the power cable to the strain-
relief bar.
CAUTION: Do not plug the power cables directly into a power outlet; you must use a PDU. For optimal system
functionality, a minimum of three power supplies are required.
Plug the other end of the power cables into a power distribution unit (PDU).
NOTE: The power supply units must have the same maximum output power.
Turning On The Enclosure
Figure 7. Enclosure Power Button
Press the power button on the enclosure. The power indicator should light.
NOTE: Once you have connected the system to the power supplies, there may be a minimal delay before you can
turn on your system.
6