Entec DH-WAPM1 사용자 설명서 - 페이지 9
{카테고리_이름} Entec DH-WAPM1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Entec DH-WAPM1 12 페이지.
페이지 인쇄Ⅳ. Storage and Maintenance
Troubleshooting
If the product does not operate smoothly, follow the Troubleshooting Guide.
If the problem is not solved after checking, please contact us or apply for A/S.
Problems
When air is not
supplied
When operation
does not stop
When the operation
time is short even
when the controller
is fully charged
When inflow air is
uncomfortable
Cause
The power was not turned on
The controller was not charged
properly
Mask and controller not connected
The filter is clogged by foreign matter
The power was not turned off.
The controller battery has reached the
end of its life.
The charger is defective
Severe filter contamination
The filter is damaged.
The filter cover or mask is damaged
Press and hold the power button on
the controller for 3 seconds
Please use after recharging
Check the connector and plug it in
Check the filter and cover and replace
the filter if there is a problem
Press and hold the power button on
the controller for 3 seconds
Check for damage and contact A/S
Check for filter contamination and
Check for filter damage and replace
Check for damage and contact A/S
– 7 –
Solution
properly
Contact A/S center
center
replace the filter
the filter
center