Dell PowerVault 56F 랙 설치 매뉴얼 - 페이지 17
{카테고리_이름} Dell PowerVault 56F에 대한 랙 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 56F 28 페이지. Dell powervault 56f switches rack installation guide
Dell PowerVault 56F에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 연결 매뉴얼 (38 페이지), 설치 매뉴얼 (8 페이지), 사용자 설명서 (42 페이지)
페이지 인쇄
support.dell.com
" $
NOTE: For instructions on installing the PowerVault switch itself, see"Installing the
Switch in the Rack" found later in this guide.
To install the rack kit in the rack, perform the following steps:
1.
Remove the rack's front and back doors.
2.
Install the slide assemblies in the rack.
The subsections that follow include instructions for performing these tasks.
&
)
*+,
+*,
You must remove the doors from the rack to provide access to the interior of the rack
and to prevent damage to the doors while installing the switch. To remove the doors,
perform the following steps.
1.
Open the latch on the front door.
If you have a 24-U (1 U=1.75 inches) rack cabinet, unlock and twist the handle
clockwise and open the door (see Figure 2).
Dell PowerVault 56F Systems Rack Installation Guide
3