Dell R1-2401 시작하기 매뉴얼 - 페이지 19
{카테고리_이름} Dell R1-2401에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell R1-2401 30 페이지. Poweredge vrtx switch modules
Dell R1-2401에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (20 페이지)
페이지 인쇄
- 1. Getting Started Guide
- 1. 1 Hardware and Initial Configuration
- 1. Switch Hardware
- 1. Initial Configuration of the Switch
- 2. Table of Contents
- 2. 2 Using the CLI
- 2. CLI Command Conventions
- 2. Accessing the Device through the CLI
- 2. Retrieving an IP Address
- 2. Security Management and Password Configuration
- 2. Configuring Login Banners
- 2. Startup Menu Procedures
- 2. Software Download
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
•
Disabled: When the password-recovery mechanism is invoked, one-time
access to the device without a password is stilled enabled, however all
configuration files (startup and backups) are removed and the following
log message is generated to the terminal after boot process completed: "All
configuration and user files were removed"
Configuring an Initial Terminal Password
To configure an initial terminal password, enter the following commands:
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line console
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password george
Configuring an Initial Telnet Password
To configure an initial Telnet password, enter the following commands:
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line telnet
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password bob
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
Plasma\GSG\Plasma_UGUsing_CLI.fm
Using the CLI
19