Dell S3048-ON 문제 해결 매뉴얼 - 페이지 21

{카테고리_이름} Dell S3048-ON에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S3048-ON 29 페이지. Enterprise switches

The following describes the Dell EMC diagnostics. These instructions apply to systems for which the ONIE diagnostics are not available.

ONIE expansion

To view all the ONIE commands available, from the ONIE prompt, enter onie- and click <tab> twice.

ONIE:/ # onie- <TAB><TAB>

onie-boot-mode

onie-console

onie-discovery-start

onie-discovery-stop

Topics:

•

S4048–ON or S3048–ON diagnostic package

•

S6000–ON, S4048–ON, or S3048–ON system information

•

CPLD versions

•

S6000–ON, S4048–ON, or S3048–ON factory defaults restore

S4048–ON or S3048–ON diagnostic package

To install the S4048–ON or S3048–ON diagnostic package on your system, follow these steps.

NOTE:

Before you begin, go to

support access account to download the package.

Boot your system to ONIE.

Enter the onie-discovery-stop command to stop the ONIE discovery mode (ONIE:/ # onie-discovery-stop).

Configure the management interface to download the image using ONIE:/ # ifconfig eth0 xx.xx.xx.xx/xx up. Also

ping the server/network IP address.

ONIE:/ # ifconfig eth0 xx.xx.xx.xx/xx up

ONIE:/ # ping -c4 xx.xx.xx.xx

PING xx.xx.xx.xx (xx.xx.xx.xx): 56 data bytes

64 bytes from xx.xx.xx.xx: seq=0 ttl=64 time=0.446 ms

64 bytes from xx.xx.xx.xx: seq=1 ttl=64 time=0.198 ms

64 bytes from xx.xx.xx.xx: seq=2 ttl=64 time=0.183 ms

64 bytes from xx.xx.xx.xx: seq=3 ttl=64 time=0.163 ms

--- xx.xx.xx.xx ping statistics ---

4 packets transmitted, 4 packets received, 0% packet loss

round-trip min/avg/max = 0.163/0.247/0.446 ms

ONIE:/ #

Install the image using the onie-nos-install command.

ONIE:/ # onie-nos-install tftp://xx.xx.xx.xx/INSTALLER-DND-SK-x.x.x.xx.bin

Stopping: discover... done.

ONIE: Executing installer: ./INSTALLER-DND-SK-x.x.x.x.BIN ...

INSTALLER-DND-SK-1.0

onie-fwpkg

onie-nos-install

onie-self-update

onie-support

http://www.dell.com/support

3% |*

12% |***

Dell EMC diagnostics

onie-syseeprom

onie-sysinfo

onie-uninstaller

and download the diagnostic package. You will need your Dell EMC

3477k

878k

0:00:29 ETA

0:00:13 ETA

Dell EMC diagnostics