Dell S4100-ON Series 설치 매뉴얼 - 페이지 26

{카테고리_이름} Dell S4100-ON Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S4100-ON Series 48 페이지.
Dell S4100-ON Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (47 페이지), 설정 매뉴얼 (21 페이지), 설치 매뉴얼 (49 페이지)

페이지 인쇄

Figure 14. Four-post threaded installation

For each rail, attach the front and back flanges to the post flanges with two user-supplied screws at each end.

S4100-ON Series installation

You can mount the switch in the 1U front-rack two-post, flush or center configuration, or a four-post configuration. The following is an

example of a front-rack configuration:

For the 1U two-post configurations, slide the switch into the rails in the same manner as the four-post configurations.

1U front-rack installation

Configure the rails that are attached to the switch.

NOTE:

For more information, see the installation instruction labels on the rail.

Attach the inner switch rails to the S4100F–ON Series (S4128F-ON, S4148F-ON, and S4148FE-ON) switch.

Line up the rail with the mounting heads and attach the rail to the chassis. Slide the rail back until it locks into place. The following

shows the detail of the front standoff with the locking tab:

S4100–ON Series installation