Dell S4148F-ON Series 설치 매뉴얼 - 페이지 12
{카테고리_이름} Dell S4148F-ON Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S4148F-ON Series 48 페이지.
Dell S4148F-ON Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (47 페이지)
페이지 인쇄
LED
Master LED
FAN LED
PSU LED
Locator LED/System Beacon
7-Segment LED for stacking
RJ-45 Ethernet LED
Table 4. System management Ethernet port LEDs
LED
Link LED
Activity LED
Table 5. SFP+ and unified SFP+ port LEDs
LED
Link LED
12
S4100–ON Series switch
Description
•
Off—Switch is in Stacking Slave mode
•
Solid green—Switch is in Stacking Master or Standalone mode
•
Off—No power
•
Solid green—Normal operation; fan powered and running at the
expected RPM
•
Solid yellow—Fan failed—including incompatible airflow
direction when you insert the PSU or fan trays with differing
airflows
•
Off—No power
•
Solid green—Normal operation
•
Solid yellow—Power supply critical event causing a shutdown.
•
Blinking yellow—PSU warning event; power continues to
operate
•
Blinking green, 1.0Hz—Standby mode
•
Blinking green, 0.5Hz—Ac power cord unplugged
•
Off—Locator function is disabled
•
Blinking blue—Locator function is enabled
•
Off—No power
•
Solid green—Hex digit representing the stack unit ID
•
Off—no link and no activity detected
•
On—Activity on the port
•
Solid yellow—10MHz activity
•
Solid green—100MHz activiity
•
Blinking green—1GHz activity
Description
•
Off—No link
•
Solid green—Link operating at a maximum speed—
autonegotiated/forced or 1G port
•
Solid yellow—Link operating at a lower speed—
autonegotiated/forced or 10/100M port
•
Off—No link
•
Flashing green—Port activity
Description
•
Off—No link
•
Solid green—Link operating at maximum speed—10G port
•
Solid yellow—Link operating at a lower speed—1G port