Dell S4248FB-ON 설치 매뉴얼 - 페이지 22

{카테고리_이름} Dell S4248FB-ON에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S4248FB-ON 47 페이지. S4200-on series
Dell S4248FB-ON에 대해서도 마찬가지입니다: 설정 매뉴얼 (29 페이지)

페이지 인쇄

1. Features

Figure 10. 1U tool-less nonthreaded square hole installation

Align and seat the front flange pegs in the holes on the front side of the vertical post.

NOTE:

Be sure that the rails click into place and are secure.

Repeat this procedure for the second rail.

To remove each rail, pull on the latch release on each flange ear and unseat each rail.

Two-post flush-mount installation

CAUTION:

Your switch is not NEBS Earthquake Z4-compliant if you this installation method.

NOTE:

For more installation instructions, see the installation labels attached to the rail assembly.

For this installation, remove the tool-less latch castings from the front side of each ReadyRails assembly, see item 1.

Use a Torx screwdriver to remove the two screws from each front latch on the switch side of the rail. Remove the tool-less latch

casting. Retain the castings for future rack requirements. Do not remove the back latch castings.

S4200-ON Series installation