Dell S4248FB-ON 설치 매뉴얼 - 페이지 25

{카테고리_이름} Dell S4248FB-ON에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S4248FB-ON 47 페이지. S4200-on series
Dell S4248FB-ON에 대해서도 마찬가지입니다: 설정 매뉴얼 (29 페이지)

페이지 인쇄

1. Features

Figure 13. Four-post threaded round-hole installation

For each rail, attach the front and back flanges to the post flanges with two user-supplied screws at each end.

S4200-ON Series switch installation

You can mount the switch in the 1U front-rack or 1U two-post flush or center configurations. The following is an example of a front-rack

configuration:

For the 1U two-post configurations, slide the switch into the rails in the same manner as the four-post configurations.

1U front-rack installation

Configure the rails that are attached to the switch.

NOTE:

For more instructions, see the installation instruction labels on the rail.

Attach the inner switch rails to the S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch.

Line up the rail with the mounting heads and attach the rail to the switch. Slide the rail back until it locks into place. The following

shows the detail of the front standoff with the locking tab:

S4200-ON Series installation