Dell S5048F-ON 펌웨어 업데이트 - 페이지 4

{카테고리_이름} Dell S5048F-ON에 대한 펌웨어 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S5048F-ON 19 페이지.
Dell S5048F-ON에 대해서도 마찬가지입니다: 설정 매뉴얼 (29 페이지)

I2C bus

NOTE:

After a thermal shutdown, the I2C bus could lock up occasionally. If a lock up occurs, you must manually power cycle

the switch.

Direct attach cables (DACs)

CAUTION:

When removing optics with DACs from the port, pull the release tab firmly and steadily. If you have

difficulties pulling out the cable, gently push the optic into the port with one hand while pulling the release tab slightly

upwards—towards the cable/module center—with the other hand. Do not jerk or tug repeatedly on the tab.

Power cycle the switch

CAUTION:

After powering off the switch and before power cycling on the switch back on, be sure that the PSU LED

indicator is off—no color displays.

ONIE infrastructure support

This release includes ONIE infrastructure support for firmware updates.

Multiple power cords

The switch has multiple power cords. Before servicing, ensure all power cords are disconnected.

Resolved issues

The following table lists the resolved issues.

Table 5. Resolved issues in this release

PR number

BL-728

BL-822

The following table lists the known issues.

Table 6. Known issues in this release

PR number

None

Description

Fixed the following INTEL-SA-00233

related security vulnerabilities:

● CVE-2018-12126

● CVE-2018-12127

● CVE-2018-12130

● CVE-2019-11091

The switch reboots when a wrong user

password is entered more than three

times.

Description

Severity

Sev 1

Sev 2

Work around

Severity