Dell S6010-ON 펌웨어 릴리스 노트 - 페이지 7

{카테고리_이름} Dell S6010-ON에 대한 펌웨어 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S6010-ON 12 페이지.
Dell S6010-ON에 대해서도 마찬가지입니다: 설치 매뉴얼 (46 페이지)

OPTION 1:

1. Boot into Rescue mode.

2. Start the firmware update process using the onie-self-update command.

ONIE:/ # onie-self-update tftp://x.x.x.x/onie-firmware-x86_64-VENDOR_MACHINE -r0.bin

OPTION 2:

1. Boot into Rescue mode.

2. Copy the firmware update binary to the target.

Using SCP:

● ONIE:/ # scp <[email protected]> :/tftp/users/<name>/fw-updater.bin<space> .

● ONIE:/ # scp <[email protected]> :/home/<name>/fw-updater.bin<space> .

WGET supports HTTP and FTP options. You can use ONIE: / # wget if supported by the host server or machine. Using

WGET:

● ONIE: / # wget --quiet http://xx.xx.x.xxx/tftpboot/users/<name>/fw-updater.bin

Use TFTP if the host or server supports this option. The .txt file must be present in the TFTP directory; for example, /

tftpboot/users/<name>/fw-updater.bin. Using TFTP:

● ONIE: / # tftp -g -r fw-updater.bin xx.xx.xxx.xxx .

3. Start the firmware update process using the onie-self-update command.

ONIE:/ # onie-self-update onie-firmware-x86_64-VENDOR_MACHINE -r0.bin

Verify firmware update

After you have updated the firmware, verify that all components—BIOS and CPLD, are running the correct version.

● To check the BIOS version, use the dmidecode -s system-version command. The BIOS version also displays during

switch bootup. You can run this command from either ONIE or the DIAG OS.

● To check the CPLD version, use the cpldupgradetool --cpldver command.

Firmware update using USB

You can manually install the OS10 software image using a USB device. Verify that the USB device supports a FAT or EXT2 file

system. For instructions to format a USB device in FAT or EXT2 format, see the Windows documentation accompanying the

USB device.

NOTE:

Using the onie-firmware-x86_64-dellemc_platform_c3538-r0.bin image only updates the ONIE

firmware components, such as BIOS and CPLD. This image does not update the base ONIE version.

1. Plug the USB storage device into the USB storage port on the switch.

2. Power up the switch to automatically boot using the ONIE: Rescue option.

3. Create a USB mount location on the system.

$ mkdir /mnt/media

4. Identify the path to the USB drive.

$ fdisk -l, blkid

5. Mount the USB media plugged into the USB port on the device.

$ mount -t vfat usb-drive-path /mnt/media

6. Install the software from the USB, where /mt/media specifies the path where the USB partition is mounted.

$ onie-self-update /mnt/media/onie-firmware-x86_64-dellemc_platform_c3538-r0.bin